Sludge Dewatering

Belt Filter Press

STS make Belt Filter Press are designed keeping in view a Sequential approach for dewatering.

FILTRATION – THICKENING – COMPACTION – DEWATERING.

This very approach towards the process helps in providing a simplistic solution towards dewatering.

Industries – STP, ETP, WTP Plants generating biological, Chemical or Mixed Sludge.

STS Belt Filter Press are designed to handle flows with consistencies as low as 0.7% to 5%

Available in range from 1m3/hour upto 40m3/hour. Complete design in SS304.

Drum Thickener

STS make Drum Thickeners are designed keeping in view the customer requirements for thickening so as to reduce the downstream equipment sizing and process.

Some of the Salient Features

  • Continous operation
  • Less floor Space requirement
  • Capable of handling wide variations in the feed
  • Can thicken upto 10 times the initial Concentration.
  • Plug and Play Unit
  • No Special Foundation requirement.

Application / Industries – STP, ETP, WTP Plants generating biological, Chemical or Mixed Sludge.

STS Drum Thickener are designed to handle flows with consistencies as low as 0.7% to 2%

Available in range from 1m3/hour upto 60m3/hour.

Complete design in SS304.

Sludge Bag Dewatering System

STS make Bag dewatering System are thoughtfully designed keeping in mind the concerns governed by the end user. This systems are to be used for smaller ETP and STP plants where the Sludge generation per day does not exceeds beyond 18m3.

Some of the Salient Features

  • No Rotating Parts
  • Lowest Power Consumtion
  • No Spillage
  • Less operating Cost
  • Operator friendly
  • Plug and play unit.

Application / Industries – STP, ETP, WTP Plants generating biological, Chemical or Mixed Sludge.

STS Bag dewatering systems are designed to handle flows with consistencies as low as 0.7% to 2%

Available in range from 1m3/hour upto 20m3/hour.

Complete design in SS304.

Floculation Tank

STS make floculation tanks are uniquely designed especially for Sludge dewatering applications.

The design features flow movement from bottom to top – Combination of Axial and radial flow with paddle type impellers suitable to achieve the best floc formation for dewatering application.

Available in various sizes – 30 litres to 700 litres.

MOC – SS304 and above.

Multidisc screw Press

STS make MDSP is suitably designed for Sludge dewatering applications for the ETP / STP applications.

Available in various sizes – 2m3/hr to 15m3/hr

MOC – SS304 and above.